Skip to main content

Kitchen Cabinets Charlotte NC | Custom Cabinetry | Fig Tree Cabinets

August 1, 2026

10 Questions to Ask Before Hiring a Cabinet Company in Charlotte NC

Quick Answer

Ask what the boxes and drawers are made of, who actually installs, whether installation and hardware are in the quote, what the lead time is measured from, and what the warranty covers. The answers to those five separate a real cabinetmaker from a reseller. Get every quote in linear feet with construction specs written down — otherwise you are comparing numbers that don’t describe the same kitchen.

Cabinetry is usually the largest single line item in a kitchen renovation, and it is the one homeowners are least equipped to evaluate. Two quotes can differ by fifteen thousand dollars and both look reasonable, because the words on them — “custom,” “solid wood,” “soft close” — are used loosely across the industry.

These are the ten questions that make the difference visible. None of them require any technical knowledge to ask, and the quality of the answers tells you most of what you need to know.

1. What are the cabinet boxes made of?

Listen for: plywood.

The box is the part you never see and the part that determines how long the kitchen lasts. Plywood boxes resist moisture and hold screws far better than particleboard, which matters in Charlotte’s humidity and matters enormously under a sink.

Particleboard is not automatically disqualifying in a budget kitchen, but it should be disclosed and reflected in the price. A company quoting particleboard at plywood prices is the most common way homeowners overpay.

2. How are the drawer boxes built?

Listen for: dovetailed solid wood, full-extension soft-close slides.

Drawers take more abuse than any other part of a kitchen. Dovetail joinery holds up over decades; stapled or glued butt joints loosen. Full-extension slides let you reach the back of the drawer instead of fishing for things in the last six inches.

This is a question with a precise answer. Vagueness here is informative.

3. Who actually installs the cabinets?

Listen for: an in-house team, included in the price.

This question predicts more about your experience than any other. When the company that built the cabinets also installs them, a fit problem is simply fixed. When installation is subcontracted, the same problem becomes a conversation between two companies, each explaining why it is the other’s responsibility, while your kitchen sits half-finished.

Ask directly: are your installers employees, and is installation in this price?

4. What exactly is included in this quote?

Listen for: an itemized breakdown, not a single number.

A quote should tell you what you are buying: boxes, doors, drawer boxes, hardware, soft-close, crown and trim, toe kick, panels, delivery, installation, and disposal of the old cabinets. Each of these is a place a low quote hides an exclusion.

Hardware is the classic one. “Cabinets” quoted without pulls and knobs can mean an unexpected several hundred to two thousand dollars depending on the kitchen. Ask whether hardware is included or allowance-based.

5. What is the lead time, and what is it measured from?

Listen for: a specific number of weeks, measured from the final field measure.

“About six weeks” is not an answer until you know six weeks from what. Production time is properly counted from the date the deposit is paid and the field measure is complete — not from your first phone call.

In Charlotte in 2026, expect 4–8 weeks of production for semi-custom and 6–12 weeks for full custom, with installation taking 1–3 days and total project time running 8–12 weeks. A company that quotes dramatically faster than this is either using stock or is not being straight with you.

6. Will I see a 3D rendering before anything is built?

Listen for: yes, as part of the design process.

A rendering is evidence that someone drew your kitchen to scale. It is also the cheapest possible moment to discover that the pantry door swings into the refrigerator or the island leaves a 30-inch walkway.

Changes on a drawing cost nothing. Changes after production cost real money and real weeks.

7. What is the finish, and how is it applied?

Listen for: conversion varnish or a 2K catalyzed finish, sprayed and cured in a controlled shop.

Finish quality is what separates cabinets that look new in year eight from cabinets that yellow, chip at the edges, and show every fingerprint by year three. Shop-applied catalyzed finishes are meaningfully more durable than site-applied paint.

If you are choosing a painted finish, this question matters more, not less — painted surfaces show wear faster and are harder to touch up than stained ones.

8. What does the warranty cover, and who honors it?

Listen for: a written warranty, with a clear answer about workmanship versus manufacturing.

Ask a specific scenario: if a door warps in year three, or the finish fails, who fixes it and at whose cost? Ask whether the warranty is from the manufacturer, the installer, or both, and what voids it.

A company that has been in Charlotte for years and expects to be here in ten answers this comfortably. One that intends to be somewhere else does not.

9. Can I see completed local projects?

Listen for: a portfolio of real Charlotte-area installations, and a showroom you can visit.

Renderings show intent; completed work shows execution. Ask to see kitchens they have finished in the area, ideally at a similar scale and budget to yours. A showroom lets you open and close a real door, feel the soft-close, and look at a finish in person rather than on a screen.

Photographs of someone else’s cabinets in a catalog are not a portfolio.

10. What happens if something goes wrong during installation?

Listen for: a straightforward description of the punch-list process.

Something almost always needs adjusting — a door out of alignment, a filler that needs trimming, a scratch from moving an appliance. That is normal. What matters is whether there is a defined process for handling it and whether it happens in days rather than months.

Ask whether there is a final walkthrough, whether a punch list gets documented, and how quickly items on it get resolved.

How to Use These Questions

Ask all ten of every company you are considering, and write the answers down. You are not looking for perfect answers — you are looking for specific ones. A cabinetmaker who knows their product answers precisely and quickly. A reseller answers in adjectives.
Then compare quotes properly:

– Same kitchen, same scope, priced in linear feet
– Construction specs written next to the price
– Installation, hardware, trim, and disposal explicitly included or excluded
– Lead time stated with its starting point
Done this way, a spread between quotes stops being mysterious. It usually turns out to be plywood versus particleboard, included versus excluded installation, or dovetail versus stapled drawers — real differences you can now price deliberately.

What You Should Expect From Us

We answer all ten of these the same way every time, because the answers don’t change: plywood boxes, dovetailed drawer boxes with full-extension soft-close hardware, in-house installation included in every package, itemized quotes, 3D renderings before anything is built, and a final walkthrough with a documented punch list.

Book a free design consultation and ask us these questions directly — then ask the same ten of everyone else you are considering. We are comfortable being compared on specifics. We serve Charlotte, Ballantyne, SouthPark, Myers Park, Matthews, Huntersville, Lake Norman, Concord, Waxhaw, Fort Mill, Rock Hill, and surrounding NC/SC communities.

Frequently Asked Questions

What should I ask a cabinet company before hiring them?

The five that matter most: what are the boxes and drawer boxes made of, who physically installs the cabinets, what exactly is included in the quote, what is the lead time measured from, and what does the warranty cover. Those five questions expose the difference between a cabinetmaker and a reseller faster than anything else, because each one has a specific, verifiable answer that a serious company gives without hesitation.

 

How do I compare cabinet quotes fairly?

Ask every company to quote the same kitchen in linear feet with the same scope, and require written construction specs alongside the price. A 10×10 kitchen equals 20 linear feet and is the standard benchmark. Without matching specs, a lower quote usually means particleboard boxes, stapled drawers, or installation excluded — not a better deal.

 

Should cabinet installation be included in the price?

Ideally, yes. When one company designs, builds, and installs, there is no gap for problems to fall into — if something does not fit, the same team owns the fix. When installation is subcontracted or excluded, a fit problem becomes a dispute between two companies while your kitchen sits unfinished. Fig Tree Cabinets includes installation in every package.

 

What are red flags when hiring a cabinet company in Charlotte?

Pressure to sign the same day, a quote that is a single lump-sum number with no itemization, vagueness about box and drawer construction, no physical showroom or portfolio of completed local work, a deposit demand above roughly 50 percent, and any refusal to put lead times or warranty terms in writing. Any one of these is a reason to slow down and get a second quote.

 

How much deposit is normal for cabinets?

A deposit in the range of 30 to 50 percent is standard, and it is what triggers production and the final field measure. Be cautious of anyone asking for full payment upfront, and equally cautious of anyone asking for nothing at all — custom cabinetry requires material purchase before installation, so a reasonable deposit is a sign of a normal operation.

 

Do I need a cabinet company that offers 3D renderings?

It is a strong signal, yes. A 3D rendering means someone has actually drawn your kitchen to scale rather than estimating from a sketch, and it lets you catch problems — a cabinet that blocks a window, an island that crowds a walkway — while they are still free to fix. If a company cannot show you the kitchen before building it, they are asking you to approve something neither of you has really seen.

 

Ready to start your cabinet project?

Start Your Cabinet Project Today

Tell us about your space, style, and needs — whether it’s a kitchen, closet, or bathroom. We’ll help you plan cabinets that fit your home and your 

budget.

    INSPIRATION LINK (OPTIONAL)
    TELL US ABOUT YOUR PROJECT
    We reply within 1–2 business days. No spam, no sales pressure — your info is only used to contact you about your project.

    Visit Our Showrooms

    We’d love to welcome you to one of our showroom locations. Visit us to explore our cabinetry collections, discuss your project, and experience the craftsmanship that defines FigTree Cabinets.

    Charlotte Showroom

    16615 Riverstone Way

    Charlotte, NC 28277

    United States

    Indian Trail Showroom

    107 Business Park Dr

    Indian Trail, NC 28079

    United States

    Leave a Reply

    Your email address will not be published. Required fields are marked *